Jacuzzi Faucet Kit Bedienungsanleitung PDF herunterladen

The Water Rainbow ﬁ ll spout/faucet kit is designed

for installation on most Jacuzzi Whirlpool Bath

products or on any bath having sufﬁ cient rim space

for mounting. The installation procedure requires

drilling holes in the bath shell, mounting ﬁ ttings,

and making the proper water supply connections

to the faucet valves and ﬁ ll spout. Hole drilling

templates and instructions are provided here for

this purpose.

Contents of Kit: Water Rainbow ﬁ ll spout as-

sembly, faucet handles with inserts--hot (red dot)

and cold (blue dot), faucet valve assembly (2),

1/4-20 x 1-1/2" hex bolt with/washer and locknut

(2), 1-1/2" diameter. push-on speednut (2), faucet

handle gasket (2), #10-24 x 3/8" PHPM screw (2),

cartridge valve wrench with instructions.

Preparation

Locate the area on the bath or spa rim where

the Water Rainbow and faucet valves are to be

installed. For separated valve installations, refer to

illustrations B and G; for paired valve installations,

refer to illustrations C and H.

For installation on all baths, locate the Water Rain-

bow ﬁ ll spout and valves on a level surface which

will allow water to clear the rim and ﬂ ow directly into

the bath (see illustration A). Also be certain the ﬁ ll

spout has easy access and that there is adequate

space for plumbing connections to the ﬁ ll spout,

both before and after installation. (Refer to plumb-

ing instructions regarding top access installation,

illustration M.)

Dry ﬁ t the Water Rainbow ﬁ ll spout and valves in

the desired area (before drilling holes) to be sure

the location is appropriate.

Drilling Holes

Detach the templates (on back page) and tape

them onto the acrylic surface of the bath rim, lo-

cating the center lines of the ﬁ ll spout and valve

holes according to appropriate dimensions given

in Illustration B or C.

Note: To insure template has been printed to

scale, measure the 2 1/2" spacing from center

Fill Spout mark and 9/32" hole mark for the 1/4

- 20 Hex Bolt anchors.

IMPORTANT: Read all instructions before beginning installation. Consult local codes for requirements.

Water Rainbow™ Fill Spout/Faucet Kit

Installation Instructions

LOCATE FILL SPOUT

ON TOP OF BATH

RIM TO ALLOW

DIRECT WATER

FLOW INTO BATH

INSIDE OF

BATH

RIM

1/4" MIN.

INTERIOR OF

BATH OR SPA

1-1/2" DIA.

1/2"

15/64" DIA.

1-3/8" DIA.

15/64" DIA.

2-1/2"

1/2"

9/32" DIA.

15-64"

HOLE DRILLING SCHEME FOR WATER RAINBOW

SPOUT AND FAUCETS - PAIRED VALVE CONFIGURATION

1-1/2" DIA.

15/64"

11/16"

COLDHOT

FAUCET

HOLES

9/32" DIA.

HOLE FOR

FILL SPOUT

INTERIOR OF

BATH OR SPA

1-1/2" DIA.

1/2"

15/64" DIA.

1-3/8" DIA.

15/64" DIA.

2-1/2"2-1/2"

11/16"

15/64" DIA.

1-1/2" DIA.

HOT WATER

FAUCET HOLE

9/32" DIA.

15/64" DIA.

COLD WATER

FAUCET HOLE

HOLE FOR FILL SPOUT

HOLE DRILLING SCHEME FOR WATER RAINBOW

SPOUT AND FAUCETS - SEPERATE VALVE CONFIGURATION

1/2"

WATER RAINBOW FILL SPOUT

AND FAUCET HANDLES

Jacuzzi Whirlpool Bath 6683000G 8/06

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Installation Instructions

The Water Rainbow ﬁ ll spout/faucet kit is designed for installation on most Jacuzzi Whirlpool Bath products or on any bath having sufﬁ cient rim spac

Seite 2 - Mounting the Valves

Using a scribe tool or awl, mark the center points for all holes, then remove the template.Drill holes from the ﬁ nished surface side of the unit care

Seite 3

GASKETINSERTFAUCET HANDLE(HOT)5/8" X 1/2"ELLVALVE (2)5/8" O.D.COPPER PIPETEE 5/8" X 5/8" X 1/2"5/8" O.D.COPPER PI

Seite 4 - Installing the Faucet Handles

OperationCheck for proper operation of the ﬁ ll spout. Always ﬁ ll the bath with a mixture of hot and cold water. Wa-ter temperatures in excess of 1

Seite 5 - Faucet Valve Replacement

Installation for Top AccessIf service access to Water Rainbow plumbing under the rim is not possible, it is possible to install the spout so that it c

Seite 6 - Jacuzzi Whirlpool Bath

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.Jacuzzi Whirlpool Bath has obtained ap

Seite 7

9/32" DIA.CL1-1/2" DIA.DRILL PILOT HOLE FIRSTHOLE FOR THREADEDPIPE EXTENSION(FILL SPOUT)INTERIOR OF BATH9/32" DIA.HOLE DRILLING TEMPLAT

Seite 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Jacuzzi Faucet Kit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sanitärkeramik Jacuzzi Faucet Kit herunter. Jacuzzi Faucet Kit User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sanitärkeramik Jacuzzi Faucet Kit